Belfast sink jig

Description

For routing Belfast /Butler sinks.|Made from 12mm hardwearing CNC machined Compact Grade High Pressure Laminate.|Will also allow drip channel groove to be routed on the underside of the worktop.|Corner radius of 25mm. Maximum distance 630mm or 1030mm when overlapping slots.|For sinks 1050mm wide and 440mm to 515mm deep.|Twin pin location for stable and accurate lining up of jig. Preset holes for 340mm, 360mm, 380mm, 400mm, 420mm, 440mm, 480mm and 500mm width, a packing piece required for sizes in between.|Jig requires:|A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.|A template guide bush with 30mm outside diameter for main recess and 16mm outside diameter for water drip groove.|A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length for main recess and a radius cytter R2.5mm for the water drip groove.|Two 100mm (4 inch) throat clamps.|Supplied with clear & comprehensive instructions for use.

Additional information